FAQ: High Dynamic Range
X-rays were initially used for research in atomic physics and medical diagnostics and therapy. Their ability to reveal structures inside an object even with an opaque surface was the driving feature of scientific and technical development of X-rays. Nowadays, beside its proven medical usefulness, X-rays are used to examine technical structures and there are telescopes to map X-rays from our Galaxy and the universe. Every radiological technician who starts in its profession learns to do X-rays of common structures like flowers, animals or teddy bears.
In the digital era, X-ray images are obtained using sensors, while film was used historically. The sensors in the medical radiological field have dimensions such as 24cm x 30cm or 43cm x 43cm. The corresponding spatial resolution for these sensors is between 70µm and 140µm. A typical high-end camera used by a professional or advanced amateur photographer might have a pixel resolution between 4 and 8 µm. Therefore, photographers might well wonder if there is any precise imaging possible with such pixel size. Let’s look at this a little more closely.
X-rays, like visible light, can be characterized by their energy or wavelength. Shorter wavelengths correspond to higher energy. The capability to penetrate an opaque structure increases with energy. If you think of a photon as a particle, smaller particles with higher energies penetrate an object more easily. An overview of this relationship is given in the table shown here:
To make this more clear, here is a series of X-Ray images with increasing energy. The first image was obtained with 40 kV which corresponds to a wavelength of 0.031nm. Our eyes are only able to see wavelengths between 400nm (blue) and 750 nm (red). Therefore, photons with a wavelength at 40 kV cannot be seen with the naked eye. The peripheral parts of the Nautilus shell are clearly depicted. A photographer would classify the circle at the center of the shell as „blown out“. In fact, they are not blown out. The radiation is not able to resolve the structure, because the wavelength of the X-rays is too long in this case to penetrate the shell.
Let’s go to shorter wavelengths (implying higher energies). Using 50 kV or a wavelength of 0.024nm gives more structure to the central parts. The photographic impression of a „blown out“ center is reduced. However, looking at the peripheral parts of the Nautilus there is a loss of intensity and a more grayish impression. It is conceivable that this might be regarded as an overall acceptable but subtle effect.
To take this further, we can go up to 60 kV or down to 0.0207nm. The center is now close to perfectly „exposed“ with some detail apparent, although some smaller structures are still not resolved. The intensity loss at the peripheral parts increases and is now pronounced. A photographer would clearly regard the periphery as „underexposed“.
The last example of this direction of higher energy and shorter wavelengths is 70 kV or a wavelength of 0.0177nm. The photons wavelength is now 57% compared to 40 kV. You may think of this as „smaller“ photons. The result is a clearly depicted core with a complete loss of peripheral structure. A photographer would have every reason to be worried about „underexposure“ and loss of detail everywhere but the center.
What we’ve seen here is that the capability of X-rays to penetrate an object and to go through an object is dependent on energy levels. With shorter wavelengths X-rays go through an object without disturbance but our sensor is „blown out“ at the peripheral parts of the Nautilus shell. Using 70 kV the central parts are much better resolved, but the periphery is too dark. The energy to use for any X-ray image therefore often depends on the primary goal of which portion of the subject is most important to capture.
In a certain sense, the compositing of images with different energies into one image can be compared to the HDR process of photography in the field of visible light. Whereby in visible light the intensity plays the essential role and not the light energy, which determines the color. When X-raying an object that requires different energy levels for accurate representation, I would therefore also speak of a High Dynamic Range image.
If combined, the four exposures shown provide a beautiful, nearly weightless image:
